Send inquiry
* Thickness: 10-150micron;
* Width: ≤1800mm;
* Roll diameter: ≤1000mm;
* Thickness of aluminum layer: 300-700Å, O.D: 1.8-3.5;
* Paper core: 76mm(3"), 152mm(6"), or as customized.
* PET metalized film can be used to pack food, medicine, groceries after printing or laminating.
* Corona treated is on the metallized side;
* Film with higher optical density up to 2.5 can be supplied bu specially required.
* Width: ≤1800mm;
* Roll diameter: ≤1000mm;
* Thickness of aluminum layer: 300-700Å, O.D: 1.8-3.5;
* Paper core: 76mm(3"), 152mm(6"), or as customized.
* PET metalized film can be used to pack food, medicine, groceries after printing or laminating.
* Corona treated is on the metallized side;
* Film with higher optical density up to 2.5 can be supplied bu specially required.
| Property | Unit | Test Method | Typical Value | |
| Corona Treatment | Dyne/cm(min.) | ASTM D-2578 | 50 | |
| Oxygen Transmission Rate | cc/m²/24hr | ASTM D-1484 (38ºC 45%RH) |
Less then 1 | |
| WVTR | g/m²*24hr | ASTM E-96 (38ºC 90%RH) |
1.0 | |
| Tensile Strength | MD | Kg/mm² | ASTM D-882 | ≥18 |
| TD | ≥18 | |||
| Elongation at Break | MD | % | ASTM D-882 | ≥75 |
| TD | ≥75 | |||
| Thermal Shrinkage (150ºC 15minutes) |
MD | % | ASTM D-1204-84 | ≤2.0 |
| TD | ≤1.5 | |||
| Kinetic C.O.F | Film/Film | ASTM D-1894 | 0.5 | |
| Seal Temperature | ºC | 1Bar 1 Sec | 115 | |
| Seal Strength | g/cm(min.) | -- | 300 | |
| Core Size(I.D) | mm | GB6673 | 76/152 | |
| Standard Width | mm | GB6673 | ≤2100 | |
| Width Tolerance | mm | GB6673 | ±2 | |