Negotiable
The date of payment from buyers deliver within days
Jiangsu
Long-term effective
2022-02-03 11:25
347
Company Profile
Wuxi Jencee Boiler Co., LtdBy certification [File Integrity]
Contact:wxjxgl(Mr.)
Email:
Telephone:
Phone:
Area:Jiangsu
Address:Jiangsu
Introduction
YLL/YGL series organic heat carrier furnaces are assembled forced circulation chain grate/fixed hearth boilers. The boiler is composed of an upper body and a lower grate/fixed furnace chamber, combined on site.
Technical Data
YLL/YGL -180SCL |
YLL/YGL |
YLL/YGL |
YLL/YGL |
YLL/YGL |
YLL/YGL |
YLL/YGL |
YLL/YGL |
YLL/YGL |
YLL/YGL |
YLL/YGL |
YLL/YGL |
YLL/YGL |
15 |
25 |
30 |
40 |
60 |
80 |
100 |
120 |
140 |
160 |
200 |
250 |
300 |
≥85 |
≥85 |
≥85 |
≥85 |
≥85 |
≥85 |
≥85 |
≥85 |
≥85 |
≥85 |
≥85 |
≥85 |
≥85 |
1.1 |
1.1 |
1.1 |
1.1 |
1.1 |
1.1 |
1.1 |
1.1 |
1.1 |
1.1 |
1.1 |
1.1 |
1.1 |
320 |
320 |
320 |
320 |
320 |
320 |
320 |
320 |
320 |
320 |
320 |
320 |
320 |
12.5 |
40 |
40 |
60 |
60 |
100 |
100 |
100 |
100 |
160 |
160 |
200 |
200 |
40 |
80 |
80 |
100 |
100 |
125 |
125 |
125 |
125 |
150 |
150 |
200 |
200 |
8.5 |
15 |
15 |
20 |
25 |
40 |
48 |
55 |
60 |
73 |
77 |
100 |
100 |
Biomass |
Biomass |
Biomass |
Biomass |
Biomass |
Biomass |
Biomass |
Biomass |
Biomass |
Biomass |
Biomass |
Biomass |
Biomass |
Structural Features
The heating surface of the Chain grate Coal fired organic heat carrier boiler
body adopts close-packed circular coils, which are composed of inner and outer two-layer close-packed circular coils. The gap between the coils is compatible with the fuel to reduce dust accumulation.
Automatic gas shielded welding process and equipment shall be used for the butt connection of the heating surface of the boiler, and real-time X-ray online detection is possible. The welding quality is stable and reliable.
The boiler is fully assembled, with compact structure, small footprint and short installation period.
Product Specification
* Parameters listed herein are just for reference are those are subject to continuous modification with product upgrading.
* The thermal efficiency of biomass furnace is 86%.
Scope of Product
Heat output: (60-300) ×104 kCal / h
Design pressure: 1.1 Mpa
Performance Advantage
1. Energy-fficient
The heat exchange surface of the furnace body adopts a close-packed coil structure, and the flue gas S-type multi-pass heat exchange, high heat exchange coefficient and high thermal efficiency.
At the end of the boiler, an air preheater or steam/hot water energy-saving products are arranged to absorb heat, lower the exhaust gas temperature, improve thermal efficiency, and reduce fuel consumption.The boiler adopts thermal insulation materials and special construction technology, so the heat loss is small.
The grate furnace arch is specially designed, the air volume is independently adjusted, the coal is burned uniformly and fully, and the coal type is widely adaptable.
Combining industrial automation control technology, Internet technology, computer software and artificial intelligence technology to establish an industrial boiler Internet of Things platform, which can realize remote human-computer interaction and data sharing, and realize automatic control.
Blowing, induced wind, etc. can be controlled by frequency conversion.
2. Safe and reliable
The heating surface of the body adopts close-packed coiled tubes, and the heating surface is arranged adequately, which effectively reduces the heat load on the surface of the tube, and the use of the heat transfer oil medium is safer.
The medium flow is reasonable, the heat transfer oil is from low (inlet) to high (outlet), the medium gas generated during operation is difficult to stay in the furnace, and it can be easily discharged from the system.
The furnace roof is arranged with a tidal top arch design of close-packed coils to avoid burning of the furnace roof and a long continuous use period.
Boiler operation adopts remote and near-ground multi-parameter monitoring, with complete automatic control and monitoring instruments.
3. Environmental protection
Appropriate flue gas treatment equipment should be configured according to the local insurance requirements, and the flue gas emission should meet the requirements.
The flue gas is discharged up to the standard after passing through the high-efficiency dust collector.
http://www.wxjencee.com/